3D Camera Placement
Roadside pole to gantry, with per-lane plate pixels
Help
📖 Open manual
Actions
⚙ Autocompute (solve settings)
⬇ Export config
⬆ Import config
Road
Lanes
3
Lane width (m)
3.5
Camera
Height (m)
6.0
Lateral X (m)
-7.0
Tilt — down angle (deg)
15
Pan — aim L/R (deg)
19
Working distance (m)
20
↻ Re-center on road
Horizontal FOV (deg)
🔓
45
Vertical FOV (deg)
🔓
26.2
Diagonal (computed):
—
°
Zoom lens (adds tele FOV)
Tele horizontal FOV (deg)
9
Tele vertical FOV (deg)
5.1
Zoom range (wide→tele):
—
Roadside pole
Sensor & plate
Sensor resolution (px)
Plate type
US / North America
EU standard
Indian
Custom
Plate size (in) — W × H
Plate mount height (m)
0.50
Approach angle (deg)
0
Char / plate height ratio
0.65
Plate image (optional)
Use synthetic plate
⬇ Save setup image (PNG)
Coverage
Road width
—
Slant to plate
—
Near on road
—
Far on road
—
Per-lane W×H · char (px)
Camera sensor view
plate shapes as the camera sees them
drag to orbit · scroll to zoom · green = plate readable in frustum
⬇ Save PNG
Close
Autocompute solver
Fix some parameters, let the system solve the rest.
Targets
Required plate pixels
Measure
width
char/height
Vehicle speed (km/h)
Camera frame rate (fps)
Cover full lane width (not just centre)
Solve for (free parameters)
Height
Lateral X
Tilt
Pan
H-FOV
V-FOV
Lane width
Mount height
Everything unchecked stays at its current value.
Constraints & objective
Plate pixels ≥ required
Capture guaranteed (zone ≥ speed/fps)
Optimize (binding)
max pixels
max speed
max lanes
Lanes are swept 1–6 automatically to find the largest count that still meets the constraints — no need to check it above.
Solve
Close